This Code applies to facilities, technology and inspection for manufacturing of other gas burning appliances (hereinafter referred to as “gas burning appliances”) of which heat input is not over 262.6 kW (200,000 kcal/h) among the gas burning appliances in conformity to the Enforcement Regulation of the Safety Control and Business of Liquefied Petroleum Gas Act (hereinafter referred to as “Enforcement Regulation”), Table 3, No. 10 and Table 7, No.4-j. <Revised on November 4, 2015>
The combustors excluded from the gas appliances subject to license in conformity to the Enforcement Regulation, Table 7, No.5-b are as follows:
(1) Gas torches used for welding and cutting,
(2) Drying furnace combustors used in casting sand dryers, printing ink dryers, concrete dryers, etc.,
(3) Combustors for heat treatment furnaces or heating furnaces used in metal heat treatment furnaces, glass and ceramic furnaces, atmosphere gas furnaces, etc.,
(4) Melting furnace combustors used in metal melting, glass melting, etc.,
(5) Combustors attached to gas cylinders of which internal volume is less than 100 mL, and
(6) Other combustors acknowledged by the Minister of Trade, Industry & Energy as not hindering safety control.
Table of Contents
1. General
1.1 Scope
1.2 Validity of Code
1.3 Reference Codes and Standards
1.3.1 Inspection standard for new technology products
1.3.2 Registration standard for manufacturing of foreign products
1.4 Definitions
1.5 Application of Codes and Standards
2. Manufacturing Installation Standard
2.1 Manufacturing Facilities
2.2 Inspection Facilities
3. Manufacturing Technology Standard
3.1 Materials
3.2 Construction and Dimensions
3.3. Devices
3.3.1 Power failure safety device
3.3.2 Head wind prevention device
3.3.3 Flame supervision device
3.3.4 Other devices
3.4 Performance
3.4.1 Product performance
3.4.2 Material performance (currently not used)
3.4.3 Operating performance
3.5 Heat Treatment
3.6 Marking
3.6.1 Product marking
3.6.2 Acceptance mark
3.6.3 Enclosure of manual
3.6.4 Marking of gas safety instructions
3.6.5 Attachment of piping marking and installation statement
4. Inspection Standard
4.1 Kinds of Inspections
4.1.1 Manufacturing installation inspection
4.1.2 Product inspection
4.2 Object Audit of Process Inspection
4.2.1 Application for audit
4.2.2 Audit method
4.2.3 Adjudication committee
4.3 Inspection Items
4.3.1 Manufacturing installation inspection
4.3.2 Product inspection
4.4 Inspection Method
4.4.1 Manufacturing installation inspection
4.4.2 Product inspection
4.5 Other Inspection Standards
4.5.1 Inspection of imported products
4.5.2 Partial omission of inspection
4.5.3 Disposal of rejected products (not applicable)
4.5.4 Detailed inspection standards
Appendix A General Standard for Operation of Quality Control System for Gas Appliance Manufacturing Plants
Appendix B General Conditions for Test of Other Gas Burning Appliances <
Appendix C Test Methods of Other Gas Burning Appliances
