Search

Code Detail
Code No. KGS AB335 2018 Classification Burners
Code Title Code for Facilities, Technology and Inspection for Manufacturing of Gas Grills
Revised Date 2018.12.13 Price 34 USD,  30 Euro

Detail Information

Scope

This Code applies to facilities, technology and inspection for manufacturing of the liquefied petroleum gas or city gas grills (hereinafter referred to as “grills”) which come under the following (1) to (3) among the combustors in conformity to the Enforcement Regulation of the Safety Control and Business Regulation of Liquefied Petroleum Gas Act (hereinafter referred to as “Enforcement Regulation”), Table 3, No. 10 and Table 7, No.4-j: <Revised on November 4, 2015>
(1) Total heat input rate is not over 7.0 kW (6,000 kcal/hr).
(2) The heat input rate of one burner is not over 4.2 kW (3,600 kcal/hr).
(3) The working gas pressure is not over 3.3 kPa.

Contents

Table of Contents

1. General
1.1 Scope
1.2 Validity of Code
1.3 Reference Codes and Standards
1.3.1 Inspection standard for new technology products
1.3.2 Registration standard for manufacturing of foreign products
1.4 Definitions
1.5 Application of Codes and Standards

2. Production Installation Standard
2.1 Manufacturing Facilities
2.2 Inspection Facilities

3. Manufacturing Technology Standard
3.1 Materials
3.2 Construction and Dimensions
3.3 Devices
3.3.1 Power failure safety device
3.3.2 Head wind prevention device (not applicable)
3.3.3 Flame supervision device
3.3.4 Other devices
3.4 Performance
3.4.1 Product performance
3.4.2 Material performance
3.4.3 Operating performance
3.5 Heat Treatment (currently not used)
3.6 Marking
3.6.1 Product marking
3.6.2 Acceptance mark
3.6.3 Enclosure of manual

4. Inspection Standard
4.1 Kinds of Inspections
4.1.1 Manufacturing installation inspection
4.1.2 Product inspection
4.2 Object Audit of Process Inspection
4.2.1 Application for audit
4.2.2 Audit method
4.2.3 Adjudication committee
4.3 Inspection Items
4.3.1 Manufacturing installation inspection
4.3.2 Product inspection
4.4 Inspection Method
4.4.1 Manufacturing installation inspection
4.4.2 Product inspection
4.5 Other Inspection Standards
4.5.1 Inspection of imported products
4.5.2 Partial omission of inspection
4.5.3 Disposal of rejected products (not applicable)
4.5.4 Detailed inspection standards

Appendix A General Standard for Operation of Quality Control System for Gas Appliance Manufacturing Plants

Appendix B Test Conditions for Gas Grills

Appendix C Test Methods of Gas Grills