Code Detail
Code No. KGS AB232 2018 Classification Burners
Code Title Code for Facilities, Technology and Inspection for Manufacturing of Gas Cabinet Heaters
Revised Date 2018.12.13 Price 47 USD,  40 Euro

Detail Information


This Code applies to the facilities, technology and inspection for manufacturing of the gas cabinet heaters (hereinafter referred to as “gas heaters”) which come under the following (1) to (2) among the combustors in conformity to the Enforcement Regulation of the Safety Control and Business of Liquefied Petroleum Gas Act (hereinafter referred to as “Enforcement Regulation”), Table 3, No. 10 and Table 7, No.4-j: <Revised on November 4, 2015>
(1) The total heat input rate is not over 232.6 kw (200,000 kcal/hr).
(2) The working gas pressure is not over 3.3 kPa.


Table of Contents

1. General
1.1 Scope
1.2 Validity of Code
1.3 Reference Codes and Standards
1.3.1 Inspection standard for new technology products
1.3.2 Registration standard for manufacturing of foreign products
1.4 Definitions
1.5 Application of Codes and Standards

2. Manufacturing Installation Standard
2.1 Manufacturing Facilities
2.2 Inspection Facilities

3. Manufacturing Technology Standard
3.1 Materials
3.2 Construction and Dimensions
3.3 Devices
3.3.1 Power failure safety device
3.3.2 Head wind prevention device (not applicable)
3.3.3 Flame supervision device
3.3.4 Other devices
3.4 Performance
3.4.1 Product performance
3.4.2 Material performance
3.4.3 Operating performance
3.5 Heat Treatment (currently not used)
3.6 Marking
3.6.1 Product marking
3.6.2 Acceptance marking
3.6.3 Enclosure of manual
3.6.4 Marking of gas safety rule
4. Inspection Standard
4.1 Kinds of Inspections
4.1.1 Manufacturing installation inspection
4.1.2 Product inspection
4.2 Object Audit of Process Inspection
4.2.1 Application for audit
4.2.2 Audit method
4.2.3 Adjudication committee
4.3 Inspection Items
4.3.1 Manufacturing installation inspection
4.3.2 Product inspection
4.4 Inspection Method
4.4.1 Manufacturing installation inspection
4.4.2 Product inspection
4.5 Other Inspection Standards
4.5.1 Inspection of imported products
4.5.2 Partial omission of inspection
4.5.3 Disposal of rejected products (not applicable)
4.5.4 Detailed inspection standards

Appendix A General Standard for Operation of Quality Control System for Gas Appliance Manufacturing Plants

Appendix B General Test Conditions for Gas Cabinet Heaters

Appendix C Test Methods of Gas Cabinet Heaters