Code Detail
Code No. KGS AB931 2020 Classification Burners
Code Title Code for Facilities, Technology and Inspection for Manufacturing of Forced Mixing Type Gas Burners
Revised Date 2020.03.18 Price 31 USD,  27 Euro

Detail Information


This Code applies to facilities, technology and inspection for manufacturing of forced mixing type gas burners in conformity to the Enforcement Regulation of the Safety Control and Business Regulation of Liquefied Petroleum Gas Act (hereinafter referred to as “the Enforcement Regulation”), Table 3, No.9 and Table 7, No. 4-i. However, forced mixing type gas burners attached to the combustors in conformity to the Enforcement Regulation, Table 3, No. 10 and the combustors specified in Table 7, No. 5-b are not covered by this Code. <Revised on November 4, 2015>

Combustors excluded from gas appliances subject to license in accordance with the Enforcement Regulation, Table 7, No. 5-b are as follows:
(1)Gas torches used in welding and cutting,
(2)Dryer burners used in cast sand dryers, printing ink dryers, concrete dryers, etc.,
(3)Heater burners of heat treatment furnaces or heating furnaces used in metal heat treatment furnaces, glass and ceramic furnaces, controlled atmosphere furnace, etc.,
(4)Burners for melting furnaces used for melting metal or glass,
(5)Burners attached to gas cylinders of which internal volume is less than 100 mL, and
(6)Other burners accepted by the Minister of Knowledge Economy to be free of safety problem.


Table of Contents
1. General
1.1 Scope
1.2 Validity of Code
1.3 Reference Codes and Standards
1.3.1 Inspection standard for new technology products
1.3.2 Registration standard for manufacturing of foreign products
1.4 Definitions 2
1.5 Application of Codes and Standards (currently not used)
1.6 Interim Measures (currently not used)
1.7 Types

2. Manufacturing Installation Standard
2.1 Manufacturing Facilities
2.2 Inspection Facilities

3. Manufacturing Technology Standard
3.1 Materials
3.2 Construction and Dimensions
3.3 Devices
3.3.1 Power failure safety device
3.3.2 Head wind prevention device (currently not used)
3.3.3 Flame supervision device
3.3.4 Other devices
3.4 Performance
3.4.1 Product performance
3.4.2 Material performance (currently not used)
3.4.3 Working performance
3.5 Heat Treatment (currently not used)
3.6 Marking
3.6.1 Product marking
3.6.2 Acceptance marking
3.6.3 Enclosure of manual

4. Inspection Standard
4.1 Kinds of Inspections
4.1.1 Manufacturing installation inspection
4.1.2 Product inspection
4.2 Object Audit of Process Inspection
4.2.1 Application for audit
4.2.2 Audit method
4.2.3 Adjudication committee
4.3 Inspection Items
4.3.1 Manufacturing installation inspection
4.3.2 Product inspection
4.4 Inspection Method
4.4.1 Manufacturing installation inspection
4.4.2 Product inspection
4.5 Other Inspection Standards
4.5.1 Inspection of imported products
4.5.2 Partial omission of inspection
4.5.3 Disposal of rejected products (not applicable)
4.5.4 Detailed inspection standards

Appendix A General Standard for Operation of Quality Control System for Gas Appliance Manufacturing Plants